diff --git a/backend/services/assetService/service/asset_service.go b/backend/services/assetService/service/asset_service.go
index dc3519c..94e864d 100644
--- a/backend/services/assetService/service/asset_service.go
+++ b/backend/services/assetService/service/asset_service.go
@@ -491,10 +491,9 @@ func (s *assetService) GetAsset(req *pb.GetAssetRequest, userID, starID int64) (
if exhibitionStartTime == 0 {
exhibitionStartTime = asset.CreatedAt // 兜底
}
- earnings = calculateRealtimeEarnings(asset.LikeCount, exhibitionStartTime, time.Now().UnixMilli())
-
- // 获取展出过期时间
+ // 获取展出过期时间（先获取，用于计算收益）
exhibitionExpireAt, _ = s.assetRepo.GetExhibitionExpireTime(asset.ID)
+ earnings = calculateRealtimeEarnings(asset.LikeCount, exhibitionStartTime, time.Now().UnixMilli(), exhibitionExpireAt)
}
// 6.5 从 asset_registry 表获取 grade
@@ -759,9 +758,16 @@ func calculateHourlyEarnings(likeCount int32) float64 {
// calculateRealtimeEarnings 实时计算展示收益
// 公式：R1 = R0 × T × [100% + Buff(n)]
// R0 = 5 水晶/小时，T = 上架时长（小时），Buff(n) 根据点赞数计算
-func calculateRealtimeEarnings(likeCount int32, startTime, now int64) int64 {
+// 注意：使用 min(now, expireAt) 确保过期后收益不再增长
+func calculateRealtimeEarnings(likeCount int32, startTime, now, expireAt int64) int64 {
+ // 计算有效截止时间（展览结束时间 vs 当前时间，取较小值）
+ endTime := now
+ if expireAt > 0 && expireAt < now {
+ endTime = expireAt
+ }
+
// 计算上架时长（毫秒转小时）
- T := (now - startTime) / 3600000
+ T := (endTime - startTime) / 3600000
if T <= 0 {
T = 1 // 最少1小时
}
diff --git a/backend/services/galleryService/repository/gallery_repository.go b/backend/services/galleryService/repository/gallery_repository.go
index d473481..4d30869 100644
--- a/backend/services/galleryService/repository/gallery_repository.go
+++ b/backend/services/galleryService/repository/gallery_repository.go
@@ -452,7 +452,7 @@ func (r *galleryRepository) GetMyExhibitedAssets(userID, starID int64, page, pag
now := time.Now().UnixMilli()
for _, item := range items {
item.HourlyEarnings = calculateHourlyEarnings(item.LikeCount)
- item.Earnings = calculateRealtimeEarnings(item.LikeCount, item.ExhibitedAt, now)
+ item.Earnings = calculateRealtimeEarnings(item.LikeCount, item.ExhibitedAt, now, item.ExpireAt)
}
return items, total, nil
@@ -496,7 +496,7 @@ func (r *galleryRepository) GetUserExhibitedAssets(userID, starID int64, page, p
// 实时计算每个资产的收益
for _, item := range items {
item.HourlyEarnings = calculateHourlyEarnings(item.LikeCount)
- item.Earnings = calculateRealtimeEarnings(item.LikeCount, item.ExhibitedAt, now)
+ item.Earnings = calculateRealtimeEarnings(item.LikeCount, item.ExhibitedAt, now, item.ExpireAt)
}
return items, total, nil
@@ -660,9 +660,16 @@ func calculateHourlyEarnings(likeCount int32) float64 {
// calculateRealtimeEarnings 实时计算展示收益
// 公式：R1 = R0 × T × [100% + Buff(n)]
// R0 = 5 水晶/小时，T = 上架时长（小时），Buff(n) 根据点赞数计算
-func calculateRealtimeEarnings(likeCount int32, startTime, now int64) int64 {
+// 注意：使用 min(now, expireAt) 确保过期后收益不再增长
+func calculateRealtimeEarnings(likeCount int32, startTime, now, expireAt int64) int64 {
+ // 计算有效截止时间（展览结束时间 vs 当前时间，取较小值）
+ endTime := now
+ if expireAt > 0 && expireAt < now {
+ endTime = expireAt
+ }
+
// 计算上架时长（毫秒转小时）
- T := (now - startTime) / 3600000
+ T := (endTime - startTime) / 3600000
if T <= 0 {
T = 1 // 最少1小时
}
diff --git a/backend/services/taskService/main.go b/backend/services/taskService/main.go
index 09dba85..d2a05cf 100644
--- a/backend/services/taskService/main.go
+++ b/backend/services/taskService/main.go
@@ -111,7 +111,7 @@ func main() {
logger.Logger.Info("Services initialized")
// 7. Init worker（goroutine 中启动）
- resetWorker := worker.NewDailyResetWorker(dailyRepo, revenueRepo, userRPCClient)
+ resetWorker := worker.NewDailyResetWorker(dailyRepo, revenueRepo, userRPCClient, galleryRPCClient)
go resetWorker.Start()
logger.Logger.Info("Reset worker started")
diff --git a/backend/services/taskService/service/revenue_service.go b/backend/services/taskService/service/revenue_service.go
index 6b8dfda..1f01786 100644
--- a/backend/services/taskService/service/revenue_service.go
+++ b/backend/services/taskService/service/revenue_service.go
@@ -80,6 +80,7 @@ func (s *revenueService) GetExhibitionRevenue(ctx context.Context, userID, starI
CycleStartTime: r.CycleStartTime,
CycleEndTime: r.CycleEndTime,
Status: r.Status,
+ CanClaim: r.Status == "claimable",
}
items = append(items, item)
}
diff --git a/backend/services/taskService/worker/daily_reset_worker.go b/backend/services/taskService/worker/daily_reset_worker.go
index c289238..bd90411 100644
--- a/backend/services/taskService/worker/daily_reset_worker.go
+++ b/backend/services/taskService/worker/daily_reset_worker.go
@@ -15,23 +15,26 @@ import (
)
type DailyResetWorker struct {
- dailyRepo repository.DailyTaskRepository
- revenueRepo repository.RevenueRepository
- userClient client.UserServiceClient
- stopCh chan struct{}
- wg sync.WaitGroup
+ dailyRepo repository.DailyTaskRepository
+ revenueRepo repository.RevenueRepository
+ userClient client.UserServiceClient
+ galleryClient client.GalleryServiceClient
+ stopCh chan struct{}
+ wg sync.WaitGroup
}
func NewDailyResetWorker(
dailyRepo repository.DailyTaskRepository,
revenueRepo repository.RevenueRepository,
userClient client.UserServiceClient,
+ galleryClient client.GalleryServiceClient,
) *DailyResetWorker {
return &DailyResetWorker{
- dailyRepo: dailyRepo,
- revenueRepo: revenueRepo,
- userClient: userClient,
- stopCh: make(chan struct{}),
+ dailyRepo: dailyRepo,
+ revenueRepo: revenueRepo,
+ userClient: userClient,
+ galleryClient: galleryClient,
+ stopCh: make(chan struct{}),
}
}
@@ -98,8 +101,8 @@ func (w *DailyResetWorker) doResetAndAutoClaim() {
logger.Logger.Info(fmt.Sprintf("DailyResetWorker: daily tasks reset: %d records updated", resetCount))
}
- // 2. 自动发放展示收益
- w.autoClaimExhibitionRevenue()
+ // 2. 自动发放展示收益（暂时关闭）
+ // w.autoClaimExhibitionRevenue()
}
func (w *DailyResetWorker) autoClaimExhibitionRevenue() {
@@ -128,6 +131,16 @@ func (w *DailyResetWorker) autoClaimExhibitionRevenue() {
zap.Int64("record_id", record.ID), zap.Error(err))
}
totalClaimed++
+
+ // 自动下架：调用 GalleryService 下架展览
+ if w.galleryClient != nil && record.AssetID > 0 {
+ if err := w.galleryClient.RemoveExhibitionByAsset(context.Background(), record.AssetID); err != nil {
+ logger.Logger.Warn("DailyResetWorker: failed to remove exhibition",
+ zap.Int64("asset_id", record.AssetID),
+ zap.Int64("revenue_record_id", record.ID),
+ zap.Error(err))
+ }
+ }
break
}
lastErr = err
diff --git a/docs/superpowers/specs/2026-05-22-lenticular-gyro-optimization-design.md b/docs/superpowers/specs/2026-05-22-lenticular-gyro-optimization-design.md
new file mode 100644
index 0000000..1a1e6b9
--- /dev/null
+++ b/docs/superpowers/specs/2026-05-22-lenticular-gyro-optimization-design.md
@@ -0,0 +1,83 @@
+# 光栅卡陀螺仪交互优化设计方案
+
+**日期:** 2026-05-22
+**文件:** `docs/superpowers/specs/2026-05-22-lenticular-gyro-optimization-design.md`
+
+---
+
+## 1. 问题描述
+
+设备使用陀螺仪倾斜查看光栅卡时，图片在左右视图之间快速来回切换，无法稳定在某一侧。
+
+**期望行为：**
+- 设备居中（不倾斜）→ 显示中性图
+- 往左倾斜 → 稳定显示左视图
+- 往右倾斜 → 稳定显示右视图
+
+**当前行为：**
+- 轻微倾斜就触发切换，且图片在左右之间来回振荡
+- 没有平衡点让图片稳定
+
+---
+
+## 2. 根本原因
+
+**原因：缺少中性阈值区（Dead Zone）**
+
+陀螺仪数据直接映射到图片切换阈值，没有任何"容忍区"。
+
+当设备略微偏离中心时：
+- `gamma` 值微小的正负变化
+- 直接导致 `x` 方向变化
+- 触发 opacity 切换
+
+加上陀螺仪本身的噪声和设备轻微晃动，导致图片不断在左右之间来回切换。
+
+---
+
+## 3. 修复方案
+
+**文件:** `frontend/composables/useHolographicPreview.js`
+
+### 修改：增大中性阈值区
+
+当前代码已有 dead zone 判断逻辑，只需增大 `db` 系数即可：
+
+```javascript
+// 第79行
+const db = 0.08 * dead // 从 0.016 改为 0.08
+```
+
+**说明：** 增大 db 系数 = 中性区变宽 = 更难触发切换 = 图片更稳定
+
+---
+
+## 4. 参数调整
+
+| 参数 | 当前值 | 修改后 | 说明 |
+|------|--------|--------|------|
+| db (dead zone) | 0.016 | 0.08 | 中性区阈值，越大越难触发切换 |
+
+**建议值范围：** 0.05 ~ 0.12
+- 值越大：中性区越宽，越稳定但响应越慢
+- 值越小：越敏感，但容易误触发
+
+---
+
+## 5. 验收标准
+
+| 测试场景 | 期望结果 |
+|---------|---------|
+| 设备静止居中 | 显示中性图，稳定不动 |
+| 轻微倾斜 | 保持中性，不触发切换 |
+| 明显往左倾斜 | 显示左视图，稳定 |
+| 明显往右倾斜 | 显示右视图，稳定 |
+| 从倾斜缓慢回到居中 | 平滑过渡，无振荡 |
+
+---
+
+## 6. 影响范围
+
+- 修改文件：`frontend/composables/useHolographicPreview.js`
+- 不影响触摸滑动交互
+- 不涉及后端或数据库
\ No newline at end of file
diff --git a/frontend/composables/useHolographicPreview.js b/frontend/composables/useHolographicPreview.js
index 815a05b..6601849 100644
--- a/frontend/composables/useHolographicPreview.js
+++ b/frontend/composables/useHolographicPreview.js
@@ -76,7 +76,7 @@ export function useHolographicPreview() {
const dy = (beta - accelBaseY) / 45 * sens
accelSmoothed = lerp(accelSmoothed, dx, k)
const dead = physics.sensorDeadzoneStrength || 1
- const db = 0.016 * dead
+ const db = 0.08 * dead
simulate(
Math.abs(accelSmoothed) < db ? 0 : clamp(accelSmoothed, -1, 1),
clamp(dy, -1, 1)
diff --git a/frontend/composables/useLenticularCraftTiltPreview.js b/frontend/composables/useLenticularCraftTiltPreview.js
index c000c1a..8499f69 100644
--- a/frontend/composables/useLenticularCraftTiltPreview.js
+++ b/frontend/composables/useLenticularCraftTiltPreview.js
@@ -9,7 +9,7 @@ const FLOW_PHYSICS = {
angleStability: 52,
transitionSmoothness: 40,
tiltSensitivity: 96,
- sensorDeadzoneStrength: 0,
+ sensorDeadzoneStrength: 1,
parallaxDepth: 18,
lenticularAnchorFloor: 0.1,
lenticularNonDominantResidualMin: 0.092,
@@ -18,7 +18,7 @@ const FLOW_PHYSICS = {
}
const DISCRETE_STEP_DEG = 13
-const DISCRETE_STEP_HYST_DEG = 5
+const DISCRETE_STEP_HYST_DEG = 9
const TILT_MAG_TAU_MS = 150
const TILT_MAG_MAX_RISE_DPS = 82
const TILT_MAG_MAX_FALL_DPS = 168
@@ -51,6 +51,7 @@ export function useLenticularCraftTiltPreview(layersRef) {
}
function simulateFromSignedDegrees(tiltMagDeg, signedDegHint) {
+ console.log('[DEBUG simulateFromSignedDegrees] called, tiltMagDeg:', tiltMagDeg, 'signedDegHint:', signedDegHint)
const ls = getLayersArray()
const n = Math.max(1, ls.length)
const raw = Math.abs(Number(tiltMagDeg) || 0)
@@ -69,6 +70,7 @@ export function useLenticularCraftTiltPreview(layersRef) {
const maxFall = TILT_MAG_MAX_FALL_DPS * sec
if (Number.isFinite(signedDegHint)) {
+ console.log('[DEBUG simulateFromSignedDegrees] signedDegHint is finite:', signedDegHint)
if (lastSignedDegHint != null && sec > 1e-6) {
const dAbsSignedDt =
(Math.abs(signedDegHint) - Math.abs(lastSignedDegHint)) / sec
@@ -94,8 +96,34 @@ export function useLenticularCraftTiltPreview(layersRef) {
const MARGIN = DISCRETE_STEP_HYST_DEG
const stepBefore = discreteStableStep.value
let s = stepBefore
- while (absDeg >= (s + 1) * STEP + MARGIN) s++
- while (s > 0 && absDeg <= s * STEP - MARGIN) s--
+
+ // 二值模式：仅允许 0(中性) 或 1(倾斜)，防止同方向重复递增档位
+ const ENTER_THRESHOLD = STEP + MARGIN
+ const EXIT_THRESHOLD = MARGIN
+
+ if (s === 0) {
+ // 中性状态：仅当倾斜超过阈值才进入档位1
+ if (absDeg >= ENTER_THRESHOLD) {
+ s = 1
+ console.log('[DEBUG] 进入档位1, absDeg:', absDeg.toFixed(2), 'signedDegHint:', signedDegHint)
+ }
+ } else if (s === 1) {
+ // 档位1状态：检测方向变化才允许退回
+ // 如果 signedDegHint 符号改变（反方向倾斜），立即回到中性
+ if (lastSignedDegHint !== null && Number.isFinite(signedDegHint)) {
+ if (signedDegHint * lastSignedDegHint < 0) {
+ // 方向改变，回到中性
+ s = 0
+ lastSignedDegHint = signedDegHint
+ console.log('[DEBUG] 方向改变，回到中性, signedDegHint:', signedDegHint.toFixed(2))
+ }
+ } else if (absDeg <= EXIT_THRESHOLD) {
+ // 没有方向信息时，使用角度阈值
+ s = 0
+ console.log('[DEBUG] 角度不足，回到中性, absDeg:', absDeg.toFixed(2))
+ }
+ }
+
discreteStableStep.value = s
const idx = s % n
const sens = physics.tiltSensitivity / 100
@@ -134,13 +162,17 @@ export function useLenticularCraftTiltPreview(layersRef) {
}
function scheduleTiltStart() {
+ console.log('[DEBUG useLenticularCraftTiltPreview] scheduleTiltStart called')
cancelScheduledTiltStart()
nextTick(() => {
relax(0.86)
lockPreviewStill()
+ console.log('[DEBUG useLenticularCraftTiltPreview] entryTiltTimer set, delay:', LENTICULAR_TILT_START_DELAY_MS)
entryTiltTimer = setTimeout(() => {
entryTiltTimer = null
+ console.log('[DEBUG useLenticularCraftTiltPreview] startTilt about to be called')
startTilt()
+ console.log('[DEBUG useLenticularCraftTiltPreview] startTilt called')
}, LENTICULAR_TILT_START_DELAY_MS)
})
}
diff --git a/frontend/composables/useLenticularStudioTilt.js b/frontend/composables/useLenticularStudioTilt.js
index f69a68e..6966c61 100644
--- a/frontend/composables/useLenticularStudioTilt.js
+++ b/frontend/composables/useLenticularStudioTilt.js
@@ -361,6 +361,7 @@ export function useLenticularStudioTilt(opts) {
}
function startAccelInternal(options = {}) {
+ console.log('[DEBUG useLenticularStudioTilt] startAccelInternal called, options:', options)
const fromNativeFallback = options.fromNativeFallback === true
mode = 'accel'
stopAccel()
@@ -379,34 +380,45 @@ export function useLenticularStudioTilt(opts) {
if (useStudioAccelDirect) {
if (typeof simulateFromSignedDegrees === 'function') {
+ console.log('[DEBUG useLenticularStudioTilt] 使用 simulateFromSignedDegrees')
resetStudioAccelBaseline()
}
accelHandler = (res) => {
+ console.log('[DEBUG useLenticularStudioTilt] accelHandler called, x:', res.x, 'y:', res.y, 'z:', res.z)
const ax = Number(res.x) || 0
const ay = Number(res.y) || 0
const az = Number(res.z) || 0
const gMag = Math.hypot(ax, ay, az)
- if (gMag < 0.12) return
+ console.log('[DEBUG useLenticularStudioTilt] gMag:', gMag.toFixed(3))
+ if (gMag < 0.12) {
+ console.log('[DEBUG useLenticularStudioTilt] gMag too small, returning')
+ return
+ }
/* 竖屏常见握持：左右倾斜主要反映为 ax/az 与重力的关系（免 warmup，避免长期无输出） */
if (typeof simulateFromSignedDegrees === 'function') {
+ console.log('[DEBUG useLenticularStudioTilt] 调用 simulateFromSignedDegrees')
const tiltRad = Math.atan2(-ax, az)
if (studioAccelBaseRad == null) {
+ console.log('[DEBUG useLenticularStudioTilt] 正在采集 baseline')
studioAccelBaselineRads.push(tiltRad)
if (studioAccelBaselineRads.length < STUDIO_ACCEL_BASELINE_FRAMES) {
simulate(0, 0)
return
}
studioAccelBaseRad = circularMeanRad(studioAccelBaselineRads)
+ console.log('[DEBUG useLenticularStudioTilt] baseline 采集完成:', studioAccelBaseRad)
studioAccelBaselineRads = []
}
let delta = tiltRad - studioAccelBaseRad
while (delta > Math.PI) delta -= 2 * Math.PI
while (delta < -Math.PI) delta += 2 * Math.PI
const signedDeg = delta * (180 / Math.PI)
+ console.log('[DEBUG useLenticularStudioTilt] delta:', delta.toFixed(4), 'signedDeg:', signedDeg.toFixed(2))
const rawAbs = Math.abs(signedDeg)
const prevLp = studioAccelDiscreteDegLp
const kLp = rawAbs >= prevLp ? 0.27 : 0.4
studioAccelDiscreteDegLp += (rawAbs - studioAccelDiscreteDegLp) * kLp
+ console.log('[DEBUG useLenticularStudioTilt] calling simulateFromSignedDegrees, mag:', studioAccelDiscreteDegLp.toFixed(2), 'signedDeg:', signedDeg.toFixed(2))
simulateFromSignedDegrees(studioAccelDiscreteDegLp, signedDeg)
} else {
const tiltRaw = Math.atan2(-ax, az) / (Math.PI / 5)
@@ -446,13 +458,17 @@ export function useLenticularStudioTilt(opts) {
}
try {
uni.onAccelerometerChange(accelHandler)
+ console.log('[DEBUG useLenticularStudioTilt] onAccelerometerChange 注册成功')
const applyStart = (interval) => {
+ console.log('[DEBUG useLenticularStudioTilt] 调用 startAccelerometer, interval:', interval)
uni.startAccelerometer({
interval,
success: () => {
+ console.log('[DEBUG useLenticularStudioTilt] startAccelerometer 成功')
gyroSourceLabel.value = 'accelerometer'
},
- fail: () => {
+ fail: (err) => {
+ console.log('[DEBUG useLenticularStudioTilt] startAccelerometer 失败:', JSON.stringify(err))
if (interval === 'game') {
applyStart('normal')
return
@@ -463,11 +479,13 @@ export function useLenticularStudioTilt(opts) {
}
applyStart('game')
} catch (e) {
+ console.log('[DEBUG useLenticularStudioTilt] try onAccelerometerChange failed:', e)
gyroSourceLabel.value = 'simulation'
}
}
function onNativeAngleFrame(x, y, z) {
+ console.log('[DEBUG useLenticularStudioTilt] onNativeAngleFrame:', x, y, z)
const vx = Number(x)
const vy = Number(y)
const vz = Number(z)
@@ -517,22 +535,27 @@ export function useLenticularStudioTilt(opts) {
}
function startNativeInternal() {
+ console.log('[DEBUG useLenticularStudioTilt] startNativeInternal called')
stopNative()
stopAccel()
resetNativeBaseline()
// #ifdef APP-PLUS
gyroModule = tryRequireImengyuGyro()
+ console.log('[DEBUG useLenticularStudioTilt] gyroModule:', gyroModule ? 'found' : 'not found')
if (!gyroModule) {
+ console.log('[DEBUG useLenticularStudioTilt] gyroModule not found, falling back to accel')
mode = 'accel'
startAccelInternal()
return
}
mode = 'native'
const myGen = tiltGen
+ console.log('[DEBUG useLenticularStudioTilt] native gyro mode set, calling startNativeGyro')
/** 与官方示例一致：normal / ui / game / fastest，game≈50Hz */
const startOpts = { interval: 'game' }
scheduleNativeGyroStallFallback = () => {
+ console.log('[DEBUG useLenticularStudioTilt] scheduleNativeGyroStallFallback called')
if (nativeWatchdogTimer != null) {
try {
clearTimeout(nativeWatchdogTimer)
@@ -541,18 +564,9 @@ export function useLenticularStudioTilt(opts) {
}
nativeWatchdogTimer = null
}
- nativeWatchdogTimer = setTimeout(() => {
- nativeWatchdogTimer = null
- if (myGen !== tiltGen) return
- if (mode !== 'native') return
- console.warn(
- '[useLenticularStudioTilt] native gyro stalled (no angle frames for ' +
- NATIVE_GYRO_STALL_FALLBACK_MS +
- 'ms), falling back to accelerometer'
- )
- stopNative()
- startAccelInternal({ fromNativeFallback: true })
- }, NATIVE_GYRO_STALL_FALLBACK_MS)
+ console.log('[DEBUG useLenticularStudioTilt] native gyro stalled, fallback to accelerometer')
+ stopNative()
+ startAccelInternal({ fromNativeFallback: true })
}
function invokeStartNativeGyro() {
@@ -582,6 +596,7 @@ export function useLenticularStudioTilt(opts) {
if (useSync) {
const v = mod.getGyroValueSync()
if (v && hasAnglePayload(v)) {
+ console.log('[DEBUG useLenticularStudioTilt] getGyroValueSync:', JSON.stringify(v))
onNativeAngleFrame(v.x, v.y, v.z)
}
return
@@ -589,6 +604,7 @@ export function useLenticularStudioTilt(opts) {
mod.getGyroValue((v) => {
if (myGen !== tiltGen || !gyroModule || !v) return
if (hasAnglePayload(v)) {
+ console.log('[DEBUG useLenticularStudioTilt] getGyroValue:', JSON.stringify(v))
onNativeAngleFrame(v.x, v.y, v.z)
}
})
@@ -602,6 +618,7 @@ export function useLenticularStudioTilt(opts) {
let kickOnce = false
const kick = () => {
+ console.log('[DEBUG useLenticularStudioTilt] kick called, kickOnce:', kickOnce)
if (kickOnce) return
if (myGen !== tiltGen || !gyroModule) return
kickOnce = true
@@ -617,10 +634,13 @@ export function useLenticularStudioTilt(opts) {
const usePoll =
typeof mod.startGyro === 'function' &&
(typeof mod.getGyroValue === 'function' || typeof mod.getGyroValueSync === 'function')
+ console.log('[DEBUG useLenticularStudioTilt] usePoll:', usePoll)
if (usePoll) {
+ console.log('[DEBUG useLenticularStudioTilt] calling mod.startGyro')
try {
mod.startGyro(startOpts, (res) => {
+ console.log('[DEBUG useLenticularStudioTilt] startGyro callback, res:', JSON.stringify(res))
if (myGen !== tiltGen || !gyroModule) return
/* 插件约定：首包只表示是否开启成功，不含持续角度；若回调无对象则无法进入官方要求的 getGyroValue 轮询 */
if (!res) {
@@ -751,6 +771,7 @@ export function useLenticularStudioTilt(opts) {
}
function start() {
+ console.log('[DEBUG useLenticularStudioTilt] start called')
// #ifdef APP-PLUS
startNativeInternal()
// #endif
diff --git a/frontend/pages.json b/frontend/pages.json
index 4069c58..e40367f 100644
--- a/frontend/pages.json
+++ b/frontend/pages.json
@@ -300,9 +300,9 @@
"current": 0,
"list": [
{
- "name": "castlove-lenticular-create",
- "path": "pages/castlove/create",
- "query": "name=%E5%85%89%E6%A0%85%E5%8D%A1"
+ "name": "",
+ "path": "",
+ "query": ""
}
]
}
diff --git a/frontend/pages/asset-detail/asset-detail.vue b/frontend/pages/asset-detail/asset-detail.vue
index ff59834..b636e9f 100644
--- a/frontend/pages/asset-detail/asset-detail.vue
+++ b/frontend/pages/asset-detail/asset-detail.vue
@@ -17,8 +17,6 @@
-
-
@@ -1014,7 +1012,7 @@ onUnmounted(() => {
width: 352rpx;
height: 520rpx;
margin-bottom: 32rpx;
- animation: card-3d-flip 15s ease-in-out infinite;
+ /* animation: card-3d-flip 15s ease-in-out infinite; */
transform-origin: center center;
}
@@ -1036,18 +1034,18 @@ onUnmounted(() => {
}
}
-.card-wrapper--lenticular {
+/* .card-wrapper--lenticular {
width: 520rpx;
height: 680rpx;
-}
+} */
.detail-lenticular-slot {
position: absolute;
left: 50%;
top: 50%;
- width: 78%;
+ width: 88%;
height: 96%;
- border-radius: 64rpx;
+ border-radius: 48rpx;
/* transform: translate(-50%, -50%) rotate(-10deg); */
transform: translate(-50%, -50%) ;
z-index: 2;
diff --git a/frontend/pages/profile/myWorks.vue b/frontend/pages/profile/myWorks.vue
index da211e8..434dc90 100644
--- a/frontend/pages/profile/myWorks.vue
+++ b/frontend/pages/profile/myWorks.vue
@@ -10,9 +10,9 @@
-
+
@@ -31,7 +31,7 @@
@@ -76,7 +76,7 @@
@@ -154,7 +154,7 @@